Brocade Communications Systems ICX 6610 Installation Manual page 38

Installing the device
NOTE
Do not use the hardware supplied in a two-post rack mounting kit to mount an ICX 6610 in a four-post rack. Mounting the
device in a four-post rack requires additional hardware to prevent possible flexing and distortion of the four-post rack when a
device is not properly installed.
1. Attach the mounting brackets to the sides of the device using the 8-32 x 3/8 in. screws
FIGURE 27 Attaching four-post brackets
1. Bracket
38
2. 8-32 x 3/8 in. screws
Brocade ICX 6610 Stackable Switch Hardware Installation Guide
53-1003620-03