Fluke 1523 Technical Manual page 57

1523, 1524 Reference Thermometer
Serial Commands - Alphabetic Listing
*RST
Set the instrument operating parameters to defined conditions.
CALCulate:AVERage:CLEar
Clear the statistical functions for all probes.
CALCulate<prb>:AVERage<n>:DATA?
Returns the value of a statistical calculation for a given probe. The CALCulate suffix,
<prb>, specifies the probe, 1 or 2. Default to 1 if omitted. The AVERage suffix, <n>,
specifies the calculation type number as listed in Table 19 on page 73. Defaults to 1 if
omitted.
CALCulate:AVERage<n>:TYPE?
Returns the keyword for the specified field type number. The AVERage suffix, <n>,
specifies the calculation type number. Default to 1 if omitted.
CALCulate<prb>:CONVert:DATE:CALibrate?
Returns the last calibration date for the specified probe. The CALCulate suffix, <prb>,
specifies the probe, 1 or 2. Defaults to 1 if omitted. The response is returned in the
format <year>,<month>,<day>.
CALCulate<prb>:CONVert:DATE:CALibrate <year>,<month>,<day>
Set the last calibration date for the specified probe.
The CALCulate suffix, <prb>, specifies the probe, 1 or 2. Defaults to 1 if omitted.
The <year> parameter is a four-digit number, 2000 to 2099.
50
Shop for Fluke products online at:
Example: *IDN?
Response: FLUKE,1524,23456,1.00
Example: *RST
This command has no response.
Example: CALC:AVER:CLE
Example: CALC2:AVER1:DATA?
Response: 0.017
Example: CLAC:AVER4:TYPE?
Response: STD
Example: CALC1:CONV:DATE:CAL?
Response: 2000,9,22
MyFlukeStore
www.
1.877.766.5412
.com