7.9.3
1523/24 As Left Test Data
1. Take as Left data by following the steps in the As Found Data section.
2. Calculate the average and the standard deviation of the measurements taken in
3. Compare the error with the specification in the Accuracy Test Setting and
Shop for Fluke products online at:
Calibration of Your Reference Thermometer Readout
CAL:DEV:RANG:SEL MV
CAL:DEV:RANGE:ADJ1 XXXX
CAL:DEV:RANGE:ADJ2 XXXX
step 1, including the Channel T2 data. Record the results.
Specification tables for each range to determine the pass/fail status. Record the
result.
MyFlukeStore
www.
Manual Calibration Process
1.877.766.5412
.com
93