Oil Pump - Suzuki GZ250 Marauder Service Manual

• Install the gearshift cam driven gear assembly.
• Install the pawl lifter
NOTE:
Apply a small quantity of THREAD LOCK "1342" to the
threads of the screws.
• Install the return spring
• Install the gearshift shaft.
NOTE:
Align the center teeth on the gearshift shaft with the center
teeth on the gearshift cam driven gear.

OIL PUMP

• Apply engine oil to the sliding surfaces of the oil pump
case, outer rotor, inner rotor and shaft, before mounting the
oil pump.
• Apply a small quantity of THREAD LOCK "1342" to the oil
pump mounting screws and tighten them.
• Install the washer
• Install the oil pump driven gear
Downloaded from www.Manualslib.com
and cam guide
99000-32050: THREAD LOCK "1342"
to the gearshift shaft as shown.
99000-32050: THREAD LOCK "1342"
and pin
and circlip
manuals search engine
ENGINE 3-54