• Remove the rear torque link
• Remove the chain buffer
• Remove the spacers
INSPECTION AND DISASSEMBLY
SWINGARM PIVOT SPACERS AND DUST SEALS
Inspect the swingarm pivot spacers and dust seals for
damage. If any defects are found, replace the spacer with a
new one.
SWINGARM NEEDLE BEARINGS
Insert the spacers into the needle bearings, move the
spacer up and down and check for any play. If there is
excessive play, replace the bearing(-s) with a new one.
Downloaded from
www.Manualslib.com
from the swingarm.
from the swingarm.
manuals search engine
CHASSIS 5-38