Suzuki GZ250 Marauder Service Manual page 169

STATOR COIL RESISTANCE
• Remove the front seat. (See p. 5-1.)
• Remove the fuel tank. (See p. 4-1.)
• Disconnect the stator coil coupler.
Measure the resistance between the three lead wires using
a tester.
Also check that the stator core is insulated.
If the resistance is incorrect, replace the stator coil with a
new one.
Stator coil resistance:
GENERATOR NO-LOAD PERFORMANCE INSPECTION
• Remove the front seat. (See p. 5-1.)
• Remove the fuel tank. (See p. 4-1.)
• Disconnect the stator coil coupler.
• Start the engine and keep it running at 5 000 r/min.
Measure the voltage between the three lead wires using a
tester.
If the tester reads under the specified value, replace the
stator coil and pick-up coil, or the generator rotor with a
new one.
Generator no-load performance:
Downloaded from www.Manualslib.com
More than 60V (AC) at 5 000 r/min
(When engine is cold)
manuals search engine
ELECTRICAL SYSTEM 6-8