Inspection And Disassembly - Suzuki GZ250 Marauder Service Manual

5-31 CHASSIS
• Remove the brake cam lever bolt and nut.
• Remove the brake cam lever
• Remove the washer , O-ring and brake camshaft

INSPECTION AND DISASSEMBLY

WHEEL BEARING ............................ See pp. 5-3 and -4.
WHEEL AXLE ................................................ See p. 5-4.
WHEEL .......................................................... See p. 5-4.
SPOKE NIPPLE ........................................... See p. 5-4.
REAR SPROCKET MOUNTING
DRUM BEARING ......................................... See p. 5-3.
* Inspect of the rear sprocket mounting drum bearing
in the same manner as the wheel bearing.
Remove the rear sprocket mounting drum bearing as fol-
lows. • Remove the dust seal using the special tool.
09913-50121: Oil seal remover
A CAUTION
The removed dust seal should be replaced with a
new one.
• Remove the rear sprocket mounting drum bearing using
the special tool.
09941-50111: Bearing remover
A CAUTION
The removed bearing should be replaced with a
new one.
Downloaded from www.Manualslib.com manuals search engine