Starter Clutch And Starter Driven Gear Bearing - Suzuki GZ250 Marauder Service Manual

STARTER CLUTCH AND STARTER DRIVEN GEAR BEARING

1 Starter driven gear
2 Starter clutch
3 Roller
4 Push piece
5 Spring
STARTER CLUTCH
Install the starter driven gear onto the starter clutch and turn
the starter driven gear by hand (the gear turns in only one
direction). The starter driven gear should t urn smoot hly. If
excessive resistance is felt while turning the starter driven
gear, inspect the starter clutch. Also, inspect the surface of the
starter driven gear which cont acts the starter clutch, for wear
or damage. If any wear or damage is found, replace th e
defective part (-s).
STARTER DRIVEN GEAR BEARING
Install the starter driven gear bearing
the crankshaft and turn the starter driven gear by hand.
Inspect the starter driven gear bearing for smooth rotation
and any abnormal noise. If the bearing does not turn
smoothly or there is any abnormal noise, replace it.
DISASSEMBLY
• Remove the starter driven gear.
• Remove the roller , spring
Downloaded from www.Manualslib.com
and push piece
manuals search engine
and gear onto
ENGINE 3-40