Suzuki GZ250 Marauder Service Manual page 57

3-21 ENGINE
• Install the left crankcase bearing using the special tool
and suitable attachment (used beanng e.g.).
09913-75510: Bearing remover/installer
• Install the washer
• Install the left drlveshaft bearing with the bearing retainer
• Install the bearing retainers
NOTE:
Apply a small quantity of THREAD LOCK "1342" to the
bearing retainer screws.
99000-32050: THREAD LOCK "1342"
• Apply grease to the oil seal lip
25010: SUZUKI SUPER GREASE "A"
• Install the driveshaft oil seals
CAUTION
When installing the oil seal
passage.
Downloaded from www.Manualslib.com
as shown.
, Do not block the oil
manuals search engine
99000-