Suzuki GZ250 Marauder Service Manual page 80

3-43 ENGINE
When installing a new circlip, pay attention to the direc-
tion of the circlip. Fit the circlip to the side where the
thrust is as shown in the illustration. The rounded side
should be against the gear surface.
Downloaded from www.Manualslib.com manuals search engine
Thrust
Sharp edge
Washers and circlips thickness
1.2 mm (0.05 in) 1.0 mm
(0.04 in) 1.0 mm (0.04 in)
1.0 mm (0.04 in) 2.0 mm
(0.08 in) 0.5 mm (0.02 in)