Suzuki GZ250 Marauder Service Manual page 47

ENGINE
3-11
• Remove the cylinder gasket
• Place a clean rag over the cylinder base to prevent the
piston pin circlip
Then, remove the piston pin circlip
pliers.
• Remove the piston pin using the special tool.
09910-34510: Piston pin puller
• Remove the piston.
• Remove the starter motor
• Flatten the lock portion of the oil seal retainer
• Remove the oil seal retainer
• Remove the spacer
• Remove the neutral switch
• Remove the neutral switch contact , spring
ring
Downloaded from www.Manualslib.com
and dowel pins.
from dropping into the crankcase.
.
manuals search engine
with a long-nose
and O-