Suzuki GZ250 Marauder Service Manual page 151

REAR SPROCKET
• Tighten the rear sprocket nuts to the specified torque.
Rear sprocket nut: 50 N-m (5.0 kg-m, 36.0 Ib-ft)
NOTE:
The stamped mark on the rear sprocket should face to
the outside.
BRAKE CAMSHAFT
• When installing the brake camshaft, apply SUZUKI SU-
PER GREASE "A" to the camshaft.
BRAKE CAM LEVER
• Install the new O-ring and washer
• Align the notch on the brake camshaft with the slit
in the brake cam lever as shown.
• Tighten the brake cam lever nut to the specified torque.
Brake cam lever nut: 10 N-m (1.0 kg-m, 7.0 Ib-fl)
Downloaded from www.Manualslib.com
99000-25010: SUZUKI SUPER GREASE "A"
manuals search engine
CHASSIS 5-34