2680A/2686A
Users Manual
Displaying Relay Status
Similar to DIO lines, there are 8 relay outputs: Rly 1 to Rly 8. The relay outputs
can be statically set or associated with an alarm output. Display is in the form
nnnn-nnnn with five characters in view at a time.
G
C
B
D
E
G
2-28
Table 2-6. Displaying Relay Status
Press the DIO (Digital I/O) key to view the Relay status.
Press the up/down arrow keys to select Relay.
Press the left/right arrow keys to display the desired Relay line, Rly8 to Rly1.
Hyphens divide the display, for example, 1111-0000.
Press the DIO key again to exit.