Using Fluke DAQ Software
3
Main Window Advanced Settings
Main Window Advanced Settings
Use the Advanced Settings dialog to define the scan rate when an alarm occurs
(Interval 3). In addition, you can disable scanning by a module or run a master
independently of the group it is in.
To use the advanced settings feature
•
Click
on the opening Fluke DAQ dialog.
alg151.bmp
The Advanced Settings include:
Autodisable Scan
Selecting Autodisable Scan causes scanning to stop if the scan queue memory in
the instrument fills up and there has been no communication from the computer for
more than 30 seconds. The default is not selected, which means scanning will not
stop automatically.
Do not ask to start slaves
Selecting Do not ask to start slaves prevents Fluke DAQ from asking to start other
instruments grouped with a Master when the Master starts scanning. The default is
not selected.
3-55