Fluke 2680A User Manual page 115

Using Fluke DAQ Software
3
Managing Your Network Using Fluke DAQ
6. Set the IP Address on the Instrument Settings dialog if using a General
Network Type (IP address is disabled if you are using an Isolated Network
Type) . Other fields are optional. You may need to contact your network
support staff to determine the IP Address.
alg106s.bmp
The dialog box entries include:
IP Address
Enter the IP Address of the instrument if you are using a General Network.
Verify Button
Click the Verify button to ping the instrument and verify that the IP Address is
correct. The instrument and your PC must both be connected to the network
for this to work.
Configuration transfer
You can transfer configuration information from the PC to the instrument,
from the instrument to the PC, or to and from a PC Card and the PC or the
instrument. PC Card operations are available only for the 2686A.
Description
Enter a meaningful description of the instrument. 35 characters maximum.
Temperature Units
Specify Celsius or Fahrenheit. This will automatically select temperature units
for all temperature measurements.
3-17