Fluke 2680A User Manual page 244

2680A/2686A
Users Manual
| separates alternative elements
" " enclose literal characters or strings which must appear as shown (except for
case)
() enclose groups of elements to clarify the scope of other symbols
<equation>
<add-term>
<mul-term>
<exp-term>
<operand>
<channel>
<alarm status>
<constant>
<mantissa>
<exponent>
<function>
<function-name>
The NetDAQ 2640A and 2645A use one or two digit channel
numbers. For example, the syntax is "C"<digit>[<digit>]. NetDAQ
does not provide the alarm status (A###), totalizer ("TOT"), or the
time of scan ("TS") values for computed channel equations.
E-2
= <add-term> { ("+" | "-") <add-term> }
= <mul-term { ("*" | "/") <mul-term> }
= <exp-term> { ("**" <exp-term> }
= [ ("+" | "-") ] <operand>
= <channel> |
<alarm status>|
<constant> |
<function> |
"(" <equation> ")"|
"TOT" | "TS"
= "C" <digit> <digit> <digit>
"A" <digit> <digit> <digit>
= <mantissa> [ <exponent> ]
= ( {<digit> }"." <digit> { <digit> } ) |
( <digit> {<digit>} ["." {<digit>}] )
= "E" [ "+" | "-" ] <digit> { <digit> }
= <function-name> "(" <equation> ")"
=
"ABS" | "EXP" | "INT" | "LN" | "LOG" | "SQR" | "TOT" | "TS"
Note