Fluke 2680A User Manual page 157

The dialog box entries include:
Data Server IP Address
The IP address of the computer running the Fluke DAQ application.
Fluke DAQ fills in this field with the first IP address found on the computer.
You must change this setting if you want to use a different interface
or if you are using a Dynamic Host Configuration Protocol (DHCP)
on your server. If you are using a DHCP server, use the computer
name instead of an IP address.
Uniform Resource Locator (URL)
The address where Fluke DAQ web files will be stored on the Internet.
Fluke DAQ fills in the field with the first IP address found on the PC. The
DHCP note above also applies to this field. In addition, the Web files can be
put on a separate Web server, in which case this field should be the URL for
that server.
Start FlukeDAQ Web Server on Start Up
Select this check box to start the Web server automatically when the
Fluke DAQ software is started.
Start FlukeDAQ Web Server
Use this button to start the Web Server manually.
Update Web Pages
Use this button to update the FlukeDAQ web pages when the Data Server
address or URL has changed.
When the Web Settings are configured and the Web Server is running, two
Web pages are available to view current scan data from the instruments. These
Web pages are named "flukedaq268x.html", which is for the 2680 Series, and
"flukedaq264x.html", for the NetDAQ. For example, if the URL setting above
were set to http://198.178.246.101, entering the URL
http://129.196.136.41/flukedaq268x.html in the address bar of a Web browser
will open a page that allows you to select the instrument device and module to
display current data from a 2680 Series module. You can also use a computer
name in the URL entered in the browser, for example.
http://computername/flukedaq268x.html.
These Web pages use an ActiveX control to display the data. Your
Web Browser must support ActiveX, such as in Internet Explorer 5.0
and later, or have a plug-in that provides the ActiveX support, to be
able to open these display Web pages and view the data.
Using Fluke DAQ Software
Configuring Web and Alarm Mail Settings
Note
Note
3
3-59