Front Panel Indicators - Fluke 2680A User Manual

No. Name
G A
H K
I J
J I
K H

Front Panel Indicators

The front panel indicators (Figure 2-9) consist of two five digit displays and a set
of annunciators. Table 2-2 summarizes the front panel indicator functions.
REVIEW
LAST
Primary Display
Table 2-1. Front Panel Key Descriptions (cont.)
Used when an alarm is active on the instrument. Press the ALARM
button to jump into monitor mode with the "first' (lowest )channel in
alarm showing. Press ALARM again to scroll to the next channel in
alarm. If you press the button when no channels are in alarm, the
instrument will beep.
Used to check which type of modules are inserted in each slot on the
instrument (PAI, FAI, DIO, or none). Use the B C keys to scroll
through the list.
When under remote control, this button returns control to the front
panel. The J button can only switch the instrument out of Remote
when there has been no communication from the computer for more
than 30 seconds. The REM annunciator is dim when that occurs.
Make configuration selection or terminate parameter entry.
Displays ON/OFF menu used to enable/disable scanning.
Annunciators
SET
MAX REM SCAN
MIN AUTO MON Mx+B
Figure 2-9. Front Panel Indicators
Preparing for Operation
Description
Secondary Display
FUNC F
ALARM
°C °F RO
mV AC DC LIMIT HI OFF
Ω
x1Mk Hz CAL
1 2 LO
Annunciators
Instrument Preparation
PRN CH
EXT TR
2
2-19