For the NetDAQ 2640A and 2645A, the totalizer debounce check box
is set on the Instrument Configuration dialog. Totalizer start count
and direction are not available on the NetDAQ.
Inserting and Configuring a Channel
After selecting a module, you need to add channels to the module.
To insert and configure a Channel
1. Highlight a module in the TreeView panel and click the Insert button.
For the NetDAQ 2640A and 2645A, channels are inserted on the
Instrument Configuration dialog.
2. Specify the number of channels you want to add on the Insert Channel dialog
box.
Using Fluke DAQ Software
Managing Your Network Using Fluke DAQ
Note
Note
3
alg112s.bmp
alg113s.bmp
3-23