Fluke 2680A User Manual page 152

2680A/2686A
Users Manual
If the Data Group has more than one instrument associated with it and you try to
start only the master instrument, the following message appears:
•
Click Yes, and Fluke DAQ will start the scan for all the instruments in the
Data Group.
•
Click No, and Fluke DAQ will start the scan and create data files for Data
Groups that have a single instrument associated with them.
When saving scans to the data file, Fluke DAQ verifies the criteria
specified in the File Size Control and renames the file if necessary.
If the master is scanning faster than the other modules, data will be repeated for
the slower modules. Computed Channels are saved using the master values; if a
Computed Channel is not configured to scan with the master, the value with the
closest Time Stamp between all modules is stored. The same rule is applied for
DIO and Totalizer. When the Data Group has more than one instrument, the data
from another instrument will be treated as additional modules, but they will have
separate columns for their Computed Channels, DIO and Totalizer data values.
3-54
Note
alg147s.eps