Configuring Web And Alarm Mail Settings - Fluke 2680A User Manual

2680A/2686A
Users Manual

Configuring Web and Alarm Mail Settings

You can use the Web and Alarm Mail Settings dialog to enter Fluke DAQ web
configuration information and to configure Fluke DAQ to send e-mail messages
reporting alarm condition.
The Web Settings portion of dialog is used to specify a URL where scanned values
from your 2680 Series or NetDAQ instrument will be sent. Use the Alarm Mail
Settings portion of the dialog to configure Fluke DAQ to automatically send
e-mail messages reporting alarm conditions using the Simple Mail Transfer
Protocol (SMTP).
To use the e-mail and web features, your PC must be connected to a
network supporting the Transmission Control Protocol/Internet
Protocol (TCP/IP).
To enter web and alarm mail settings
•
Click the
Settings dialog appears.
3-58
Note
button on the Fluke DAQ toolbar and the Web and Mail
alg132s.bmp