Input Module And Relay Card Installation - Fluke 2638A User Manual

Menu Item
Screen Saver
Calibration
Date
Password
Management
Resume Scan
Remote Port
Relay Counter

Input Module and Relay Card Installation

Before an Input Module can be inserted into the rear panel, a relay card must be installed.
Use the procedure below and refer to Figure 2-6 as necessary to install the relay card:
1. Power off the Product with the main power switch.
2. Remove the six screws that secures the plastic frame to the rear panel.
3. Remove the plastic frame.
4. Slide the aluminum slot protector out of the Product.
5. Carefully align the rails of the relay card into the slot guides.
6. Slowly push the relay card into the Product until the card is fully seated.
7. Install the plastic frame and secure it to the rear panel with six screws.
info@Fluke-Direct.com
Table 2-2. Instrument Setup Menu (cont.)
Change the wait time or disable the screensaver.
Shows the date that the Product was last calibrated. See
the 2638A Calibration Manual for more information.
Change the Admin and User profile passwords.
Sets the Product to automatically turn on and resume
scanning and recording after a power loss.
Configure the LAN Ethernet or serial USB communication
settings.
Shows how many times the channel relays have been
scanned along with the name, serial number, and
calibration date of the Input Module.
Do not force the relay card into the slot. The card should easily
move when the rails of the relay card are properly aligned in the
slot guides.
The 2638A/05 has only one available relay slot. Do not remove
the cover plates on slots 2 and 3. This will damage the Product
and require a return for service.
Fluke-Direct
Description
WCaution
Initial Setup and Configuration
Input Module and Relay Card Installation
Selections Available
Never, 15 Min, 30 Min, or
60 Min
--
See "Set Up Security" in this
chapter for more information.
See "Automatic Power Loss
Scan Resume" in Chapter 4
for more information.
See the 2638 Remote
Programmers Guide for more
information.
--
.com
1.888.475.5235
2
2-7