Getting Pc Card Scan Data - Fluke 2680A User Manual

Using Fluke DAQ Software
3
Managing Your Network Using Fluke DAQ

Getting PC Card Scan Data

Click the button to open the PC Card Data File Configuration
dialog shown below. This can only be done when the 2686A instrument is not
scanning.
alg166s.bmp
If necessary, create a Data Group to save the data or use one of the other Data
Groups already created in the configuration screen. After making all other settings,
select From: Card in 2686A if the PC Card is in the slot in the 2686A unit, or
From: Card in PC and the correct drive letter if it is in a PC Card slot or memory
card reader on the PC.
The Data Group, Master, Data File, and Data Settings work the same as with the
Advanced Data File Configuration described in this chapter, except that only this
single 2686A unit is shown. If Insert Labels is used, the configuration in Fluke
DAQ for this instrument needs to be the same as the configuration of the 2868A
when the scan data was collected, or the labels may not be correct.
3-35