Fluke 2680A User Manual page 56

2680A/2686A
Users Manual
Annunciator
REVIEW
MAX
REM
SCAN
SET
FUNC
F
LAST
MIN
AUTO
MON
Mx+B
ALARM
°C
°F
R0
m
V
AC
DC
x1
M
2-20
Table 2-2. Annunciator Display Descriptions
Displays while reviewing the instrument parameters.
(Not Used.)
Indicates active communications connection with the host computer (bright
display) or inactive communications (dim display).
Displays while the instrument is scanning.
Displays while setting the instrument parameters.
Displays while monitoring a computed channel.
(Not Used.)
(Not Used.)
(Not Used.)
Displays while monitoring a channel with Autorange selected.
Displays while monitoring a channel.
Displays bright while monitoring a channel scaled with an M value other than
1 and/or a B value other than 0.
Displays bright when the Alarm Triggering interval is in use (due to a trigger
alarm going off), All other alarm conditions show the annunciator dim. It is
flashing if monitoring a channel that is in alarm.
Displays when you monitor a channel for which the measurement function is
in degrees Celsius.
Displays when you monitor a channel for which the measurement function is
in degrees Fahrenheit.
(Not Used.)
Displays when you monitor a channel for which the measurement value is
scaled by .001 (milli).
Displays when you monitor a channel for which the measurement function is
volts. Operates in conjunction with the AC and DC annunciators.
Displays when you monitor a channel for which the measurement function is
in Alternating Current (AC).
Displays when you monitor a channel for which the measurement function is
in Direct Current (DC).
(Not used.)
Displays when you monitor a channel for which the measurement value is
scaled by 1,000,000 (mega).
Description