Pc Connections; Wifi Support; Wifi Setup - Fluke 1738 User Manual

1736/1738
Users Manual

PC Connections

To connect the PC to the Logger:
1. Turn on the computer and the Logger.
2. Install the Energy Analyze Plus Software.
3. Connect the USB cable to the USB ports of the computer and the
Logger. See Figure 16.
USB Port
Figure 16. Power Logger to PC Connections
See the Energy Analyze Plus Online Help for information about how to
use the software.
56

WiFi Support

With the USB WiFi Adapter you can use the Fluke Connect App for
asset management, trending and sharing measurement data,
wirelessly control the Logger with a PC/smartphone/tablet, and
download measurement data and screenshots to the Energy Analyze
Plus software.

WiFi Setup

The Logger supports a direct connection between a PC, smartphone,
or tablet. It also supports a connection from the Logger to an access
point of a WiFi infrastructure.
Connection to the WiFi infrastructure requires the license for
WiFi Infrastructure.
Before you setup a connection, see WiFi and WiFi/BLE-to-USB
Adapter on page 4 for information about how to install the adapter.
Make sure the Logger is turned on and in the range of 5 to 10 meters
(depends on the connection mode) to the client or access point.
To set the connection mode and see the WiFi connection details from
the Logger:
1. Push  .
2. Push  (Instrument Settings).
3. Push  (Tools).
4. Push  /  to highlight WiFi Configuration and push
confirm. Or, touch WiFi Configuration touch target.
5. Push  /  to highlight Mode and push
6. Select Direct Connection or WiFi-Infrastructure in the list and
confirm with  .
Note

 .
to