Inserting And Configuring A Channel - Fluke Data Acquisition System/Data Logging System 2680A Getting Started Manual

Inserting and Configuring a Channel

After selecting a module, you need to add channels to the module.
To insert and configure a Channel
1. Highlight a module in the TreeView panel and click the Insert button.
2. Specify the number of channels you want to insert on the Insert Channel
dialog box.
3. Click OK. The channels are added to the module and appear in the TreeView
panel.
Managing Your Network Using Fluke DAQ
Getting Started
alg112s.bmp
alg113s.bmp
alg114s.bmp
43