Setting Menu 2: Communication Settings (Setting The Modbus Rtu Communication) - Mitsubishi Electric ME96SSRA-MB User Manual

3. Setting
3.3. Setting Menu 2: Communication Settings (Setting the MODBUS
<Setting flow when without optional plug-in module, with ME-4210-SS96, with ME-0052-SS96 or with ME-0000BU-SS96>
In the operation mode, press
becomes available.
Setting Menu
DISPLAY SET
®
①MODBUS
RTU
address
DISPLAY SET
®
②MODBUS
RTU
baud rates
DISPLAY SET
®
③MODBUS
RTU
parity
DISPLAY SET
®
④MODBUS
RTU
stop bit
SET
Setting Menu
+ simultaneously for 2 seconds or more, and the following operation
RESET
SET
Set the setting menu number to "2".
(as shown in the right figure)
®
Set the MODBUS RTU address number.
Selectable addresses: 1 to 255
®
Set the MODBUS RTU baud rate.
2400bps
4800bps
9600bps
19.2kbps
38.4kbps
®
Set the MODBUS RTU parity.
non
odd
even（EVEn）
®
Set the MODBUS RTU stop bit.
Stop bit 1
According to the setting flow (page 16 to 21), save the changed
contents, or continue to the other setting menu.
Stop bit 2
26
®
RTU communication)