Mitsubishi Electric ME96SSRA-MB User Manual page 26

Electronic multi-measuring instrument
Hide thumbs Also See for ME96SSRA-MB:
Table of Contents

Advertisement

3. Setting
3.2 Setting menu 1: Basic Settings (Setting the Phase Wire System, Display Pattern,
⑤Frequency
DISPLAY
SET
Time constant for
rolling demand
DISPLAY
SET
Time constant
for current demand
SET
Setting Menu
In the case of use only by the Setting menu 1, please go to "5. Operation" (from page 63).
In the case to use additional functions, please go to "Setting Menus 2 - 8" (from page 26).
If the contents in the setting menu 1 are changed, the maximum value, minimum value,
demand value of related measurement items will be reset.
Note
(However, active energy, reactive energy and Apparent energy will not be reset.)
For detail, refer to section 3.15.
VT/Direct Voltage, CT Primary Current, etc.)
Set the frequency.
50Hz
Note1.The scale value of the frequency of the bar graph display
is changed, too.
Note2.Scale of the analog output is changed, too.
Set the interval time constant for the rolling demand.
(For the rolling demand, refer to page 73.)
(1)Interval time constant
Setting range
1 to 15 to 60(min)
(2)Subinterval time constant
Setting range
1 to 60(min)
・Error display (E05) appears when the interval time constant
is set to a value that is not dividable by the subinterval time
period. After that, please press
and it once again.
・Even when the display pattern not display the rolling
demand, this screen appears. If the rolling demand is not
necessary, press the
Set the time constant for current demand.
(For the demand time period, refer to page 70.)
0 s
40 s
10 s
50 s
20 s
1 min
30 s
2 min
Note) Even when the display pattern not display the current demand, this screen
appears. If the current demand is not necessary, press the
According to the setting flow (page 16 to 21), save the changed
contents, or continue to the other setting menu.
60Hz
Setting step
1min
Setting step
1min
, review the setting value
SET
as it is.
SET
3 min
7 min
15 min
20 min
4 min
8 min
5 min
9 min
25 min
6 min
10 min
30 min
25
as it is.
SET

Advertisement

Table of Contents
loading

Table of Contents