3. Setting
3.14. Setting Value Confirmation Menus 1-9: Confirming the Settings in the Setting Menus 1-8
Setting Value Confirmation
When
is pressed for at least 2 seconds in the operation mode, the following operation becomes available.
SET
Setting value
confirmation menu
Test Mode
Press
for 2 seconds to move the set values confirmation mode.
SET
Select setting value confirmation menu number "9". Press
For more information about how to use the Test Mode, refer to page 57 or later.
The screen transitions and operations are the same as for
Setting Menus 1 to 8 and CL.
Refer to Setting Menus 1 to 8 and CL (pages 22 to 49).
(Note: Settings cannot be changed in the Setting value
confirmation mode.)
and Test Mode in Setting Menu 9
to move to test mode.
SET
50