Mitsubishi Electric ME96SSRA-MB User Manual page 55

3. Setting
3.17.Setting the Special Display Pattern P00
Returns to the setting for
the upper stage of the
display 4-1.
DISPLAY
③VT / direct voltage
(hereafter same as the setting menu 1)
1. The following measurement items cannot be set by the display pattern "P00."
Set them separately in the "Setting menu 3", "Setting menu 7" and "Setting menu 8."
Note
2. The phases of current and voltage cannot be specified. Press the
operation mode for switching phases.
3. For the settings other than the 3-phase 4-wire setting, the following measurement items
cannot be set.
Continued form the previous page
（5）
Set the display of the display 4-2.
Select "yES" by or
＋
When you do not want to display the display 2,
select "no" and press
（6）
Set the upper stage of the display 4-2 to PF.
＋
Select "PF" by or
（7）
Set the upper stage of the display 4-2 to W.
Select "W" by ＋ or
（8）
Set the lower stage of the display 4-2 to no display.
Set the unit code of the lower stage to no display
by or and press
＋ －
（9）
Set the display 4-3 to no display.
Select "no" by or
＋
Note: When the display 4-3 is set to no display, the
display 4-4 is also set to no display automatically.
Reactive energy (imported LEAD), Reactive energy (exported LAG),
Reactive energy (exported LEAD), Harmonic current, Harmonic voltage,
Periodic active energy, Rolling demand, Digital input, Digital output, Operation time
N-phase current, N-phase current demand, apparent power, apparent energy
SET
and press .
－
.
SET
－
and press SET .
－ and press SET .
.
SET
and press .
－
SET
54
SET
SET
SET
SET
button in the
PHASE