Mitsubishi Electric ME96SSRA-MB User Manual page 18

Electronic multi-measuring instrument
Hide thumbs Also See for ME96SSRA-MB:
Table of Contents

Advertisement

3. Setting
3.1. Setting flow
<Setting Procedure>
Press
and
SET
RESET
seconds to get in the setting mode.
Select a setting menu number by
Use the
button to select a setting menu number.
SET
Set each setting item. (Refer to page 22 and later
pages.)
Setting Mode or Setting Value Confirmation Mode
Setting Menu
4
Model +
option code
Version
display
Backlight
brightness
Backlight
auto off
Display
Back light flickers
update time
current delay time
<With ME-4210-SS96 only>
※1 . If the password protection setting is enabled, it is
necessary to enter the password in shift from the
operation mode to the setting mode.
※2.For Setting Value Confirmation, it returns to Operation
Mode.
※3.This is not display in Setting Mode.
simultaneously for 2
or
.
Setting Menu
5
Setting Menu
Alarm item
Analog output
Alarm value
Analog output
Alarm delay
Analog output
time
Alarm cancel
Analog output
method
Output Limit
during alarms
<With ME-4210-SS96 only>
Motor starting
Pulse / Alarm
Arrow in Figure
output
Pulse output
Omitted in figure Select a set value.
⑤After completion of setting, select 'End' in the setting
menu and press
⑥When the End display appears, press
6
Setting Menu
7
Periodic active
1
energy display
Periodic active
2
energy setting
Rolling demand
3
display
Rolling demand
4
time setting
Digital input/
output display
Digital input
reset method
Action
Shift from the operation mode to the setting mode.
Shift from the operation mode to the set value confirmation mode.
Select the menu number to set or "End" .
Get into each setting screen. Shift to the next setting item.
Go back to the previous setting item.
Shift to the End screen.
Memorize the setting contents, and go back to the operation mode.
Select "CANCEL."
Cancel the settings.
Skip remaining setting items during setting.
Set values return to the factory default value.
Shift from the operation mode to the password protection mode.
17
.
SET
once again.
SET
Setting Value
※3
Setting Menu
8
Confirmation Menu
Operation time
※3
display
Target for
counting operation
time setting
Operation time
threshold
Phase display
setting
Set IEC
mode
<With Optional pug-in module only>
Button operation
SET
RESET
Press them simultaneously
Press it for 2 seconds.
SET
or
Press it several times.
SET
Press it.
Press it.
DISPLAY
or
Press it several times.
SET
Press it.
SET
Press it.
or
Press it.
SET
Press it.
Press it for 1 second.
SET
RESET
PHASE
Press it for 2 seconds.
Press it for 2 seconds.
RESET
PHASE
9
Test Mode

Advertisement

Table of Contents
loading

Table of Contents