Mitsubishi Electric ME96SSRA-MB User Manual page 22

3. Setting
3.1. Setting flow
Setting Mode or Setting Value Confirmation Mode
Setting Menu 4
Model +
Alarm item
option code
Version
Alarm value
display
Backlight Alarm delay
brightness
Backlight Alarm cancel
auto off
Display
Back light flickers
update time
during alarms
Motor starting
current delay time
※1 ． If the password protection setting is enabled, it is
necessary to enter the password in shift from the
operation mode to the setting mode.
※2．For Setting Value Confirmation, it returns to Operation
Mode.
※3．This is not display in Setting Mode.
Setting Menu 5
Setting Menu
Logging ID
Logging Data
Clear
Logging-item
time
pattern
Detailed data
Logging cycle
method
Arrow in Figure
Omitted in figure Select a set value.
6 Setting Menu 7
Periodic active
energy display
Periodic active
energy setting
Rolling demand
display
Action
Shift from the operation mode to the setting mode.
Shift from the operation mode to the set value confirmation mode.
Select the menu number to set or "End" .
Get into each setting screen. Shift to the next setting item.
Go back to the previous setting item.
Shift to the End screen.
Memorize the setting contents, and go back to the operation mode.
Select "CANCEL."
Cancel the settings.
Skip remaining setting items during setting.
Set values return to the factory default value.
Shift from the operation mode to the password protection mode.
21
Setting Value
※3
Setting Menu 8
Confirmation Menu
Operation time
Test Mode
※3
display
Target for
counting operation
time setting
Operation time
threshold
Phase display
setting
Set IEC
mode
Button operation
＋
SET RESET Press them simultaneously
Press it for 2 seconds.
SET
or
Press it several times.
＋ －
SET
Press it.
DISPLAY Press it.
or
Press it several times.
＋ －
SET Press it.
SET Press it.
or
Press it.
＋ －
SET Press it.
SET Press it for 1 second.
＋
RESET PHASE Press it for 2 seconds.
＋
Press it for 2 seconds.
RESET PHASE
9