Installation 5. How To Insert And Eject The Sd Memory Card (Me-0000Bu-Ss96) - Mitsubishi Electric ME96SSRA-MB User Manual

Installation 5. How to insert and eject the SD memory card (ME-0000BU-SS96)

■How to insert the SD memory card
Slide the SD memory card straight into the slot until it clicks into place.
・Make sure to use the SD memory card manufactured by Mitsubishi Electric Corporation (Model
EMU4-SD2GB). Using the other types of the SD memory card may cause the trouble such as data
CAUTION
destruction of the memory card or system failure.
・Insert the SD memory card with the write protect switch "OFF". If the write protect switch is "ON",
the ME-0000BU-SS96 does not communicate with an SD memory card.
■How to eject the SD memory card
1) Check the SD C. LED turns off
2) Push the SD memory card in until it clicks into place.
3) The SD memory card comes out by itself.
During communication with the SD memory card, ejection of the memory card may cause data
CAUTION
corruption of the memory card or failure of this unit or the memory card. Check that SD C.LED turns
off to eject the SD memory card.
1) Check the SD C. LED
turns off
2) Push the SD memory card in.
3) The SD memory card coes out.
100