Table of Contents
Advertisement
4. Set-up
4.3 Communication, Cancel of Digital Input Set-up
In the operation mode, press the
operation becomes available.
Set-up menu
DISPLAY
SET
1 Communication
method
DISPLAY
SET
2 ModBus address
DISPLAY
SET
3 ModBus
baud rates
DISPLAY
SET
4 ModBus parity
DISPLAY
SET
5 ModBus stop bit
DISPLAY
SET
and the
SET
RESET
Set the set-up menu number to "2". (Set as shown in the right
display.)
+
–
,
1 Set the "CC-Link" or "ModBus" as the communication
method.
This display appears only if the type of ME96NSR-MB has
+
–
,
the type of ME-0040C-NS96 optional plug-in module.
CC
:
485
:
2 Set the ModBus address number.
In the case of CC-Link, this display does not appear.
+
–
,
Settable addresses: 1 to 255
3 Set the ModBus baud rate.
In the case of CC-Link, this display does not appear.
+
–
,
Settable baud rate:
4 Set the ModBus parity.
In the case of CC-Link, this display does not appear.
+
–
,
Settable parity:
5 Set the ModBus stop bit.
In the case of CC-Link, this display does not appear.
+
–
,
simultaneously for 2 seconds or more, and the following
CC-Link
ModBus
2400 bps
4800 bps
9600 bps
19.2 kbps
38.4 kbps
non
odd
EVEn
Stop bit : 1
Stop bit : 2
Set-up Menu 2
Advertisement
Table of Contents
