Initializing Related Items By Changing Settings - Mitsubishi Electric ME96SSRA-MB User Manual

3. Setting

3.15. Initializing Related Items by Changing Settings

When a setting value is changed, the related setting items and measurement data (maximum/minimum values) will return to
the default settings. Refer to the following list.
Setting item to be changed
Initialized item
Phase wire system
Menu 1 Display pattern
VT/direct voltage
Menu2 MODBUS®TCP Default gateway
Current scale
Voltage scale
Menu 3
Power scale
Reactive power scale
Upper/lower limit alarm item
Menu 5
Upper/lower limit alarm value
Analog output item
Maximum current scale
Maximum current demand scale
Maximum voltage scale
Menu 6
Maximum active power scale
Active power single deflection/
double deflection
Maximum reactive power scale
Power factor
-0.5 to 1 to 0.5／-0 to 1 to 0
Control setting for switching Periodic
Active energy time segments
Menu 7
Setting of rolling demand digital input
time period
Menu 8 Threshold for counting Operation time
Current Maximum/minimum value
Current demand Maximum/minimum value
Voltage Maximum/minimum value
Active power Maximum/minimum value
Reactive power Maximum/minimum value
Apparent power Maximum/minimum value
Power factor Maximum/minimum value
Frequency Maximum/minimum value
Harmonic current Maximum value
Harmonic voltage Maximum value
Rolling demand(DW,Dvar,DVA)
value
Communication optional plug-in module reset (*2)
●：The setting value will be reset to the default value.
○：The setting will be reset to the value corresponding to the phase wire system.
*1: The settings will not return to the default values when the setting is switched only between "1N2 display" and "1N3 display" in
the 1-phase 3-wire setting.
*2: Communication optional plug-in module is reset.
Menu 1
●
○
● ●
● ●
● ●
●
●
●
●
●
● ●
● ●
●
● ●
●
●
●
● ●
● ●
● ●
● ●
● ●
●
●
● ●
Maximum
● ●
● ●
51
Menu 2 Menu 5 Menu 6
CT current
●
●
●
●
●
●
●
●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
● ●
Menu 8
●
●
●
●
●
●
●
●
●
●
●
●
●
●
●