Function Modes - Mitsubishi Electric ME96SSRA-MB User Manual

2. Function Modes

The following function modes are available for this Multi-Measuring instrument. Operation mode is displayed after auxiliary
power turns on. It is then possible to switch to the desired mode.
Mode
This mode is for displaying each measured value using digital numerical values and
Operation
bar graphs.
Mode
Operation mode contains "Current Value Display" that displays the current value, and
"Maximum/Minimum Value Display" that displays old maximum/minimum values.
In addition, for each display, the cyclic display function can be used to switch between the
screens every 5 seconds.
This mode is for changing the setting values related to measurement and output functions.
Setting Mode
The following special operations can be executed from the "CANCEL Display" for
changing/cancelling setting values.
●The instrument is reset.
●Reset the settings to the factory defaults
This mode is for confirming the setting values for each setting item.(In this mode, settings
Setting Value
cannot be changed in order to prevent accidental changing of settings.)
confirmation
This mode contains test functions that can be used for equipment startup.
mode
(Test Mode)
●Analog Output Adjustment: Analog output can be adjusted (zero adjustment and span
●Output Test:
●Communication Test:
■Diagram of Each Mode
Operation mode
Current value
display
Maximum/minimum
value display
Description
adjustment).
Analog output can be switched, pulse output can be executed,
and alarm contact points can be opened/closed without
measurement input (voltage/current).
Fixed numerical data can be returned without measurement
input (voltage/current).
＋
Pressing simultaneously for 2 seconds
SET RESET
SET
End Display
Save the settings
＋
SET
CANCEL
Display
Cancel the settings
Press for 2 seconds
SET
SET
When "End" is selected
from the menu
15
Setting mode
SET
When "End" is
selected from
the menu
－
Setting value
confirmation mode
Test mode
Reference
Pages
P.63 to P.76
P.16 to P.49
P.51 to P.56
P.50,
P.57 to P.62