Setting Run Time - Beckman Coulter Avanti J-20 XP Instruction Manual

Operation
Action
3. Turn the SPEED knob until
the required RCF value
appears in the SPEED
display.

SETTING RUN TIME

TIME/
HOLD
Timed Run
Action
1. Turn the TIME knob until
the required run time appears
in the TIME display.
2. When all run parameters
are entered, press
3-6
Result
The centrifuge operates at a speed calculated to produce the set RCF
value. Press
Pressing the
mode and HOLD mode. HR:MIN mode is the default.
Result
If you enter more than 59 minutes in the minutes field, the system
automatically converts the entry to hours and minutes after
is pressed.
The rotor begins to accelerate and the display begins showing the
•UV7TV—
. remaining run time. The run will end when the time counts down to 0
or when
to display the RPM value.
RPM/RCF
key toggles the system between HR:MIN
TIME/HOLD
TIME
00:20
•UVQR—
is pressed.
HR:MIN
•APVAT—