Entering Run Time - Beckman Coulter Avanti J-HC Instructions For Use Manual

The RPM
3
Enter the required RCF on the keypad and press
• The RCF and the corresponding RPM appear in the
• The RCF ( g) indicator illuminates on the actual value display, indicating that RCF ( g) is
being displayed during the run.
• When
• If you enter an RCF value that is unachievable for the installed rotor, a message will appear
telling you the rotor's achievable RCF value range.

Entering Run Time

Run time can be entered in hours and minutes or in g-seconds. Hold mode is used for continuous
operation.
Entering a Timed Run
1
TIME
Press
HH:MM ,
2
Use they keypad to enter the required time (up to 99 hours, 59 minutes) and press
PN J3HC-IM-5AD
= - -  G field flashes.
ENTER START
and are pressed, the centrifuge runs at the calculated RPM.
.
G-SEC , and HOLD soft keys appear.
ENTER.
Speed:
field.
2
Operation
Manual Operation
ENTER
.
2-7