Beckman Coulter Avanti J-20 XP Instruction Manual page 3

!
SAFETY NOTICE
This safety notice summarizes information basic to the safe operation of the equipment
described in this manual. The international symbol displayed above is a reminder that all
safety instructions should be read and understood before installation, operation, mainte-
nance, or repair of this instrument. When you see the symbol on other pages, pay special
attention to the safety information presented. Observance of safety precautions will also
help to avoid actions that could damage or adversely affect the performance of the
centrifuge.
Safety During Installation and/or Maintenance
This centrifuge is designed to be installed by a Beckman Coulter field service representa-
tive. Installation by anyone other than authorized Beckman Coulter personnel invalidates
any warranty covering the instrument.
Any servicing of this equipment that requires removal of any covers can expose parts that
involve the risk of electric shock or personal injury. Make sure that the power switch is
turned off and the instrument is disconnected from the main power source, and refer such
servicing to qualified personnel.
Be sure to use the anchoring system to secure the centrifuge in place. The anchoring
system is designed to reduce the possibility of injury or damage that could result from
instrument movement in the event of a major rotor mishap.
Do not replace any centrifuge components with parts not specified for use on this
instrument.
Electrical Safety
To reduce the risk of electrical shock, this equipment uses a three or five-wire electrical
cord and plug to connect this equipment to earth-ground. To preserve this safety feature:
• Make sure that the matching wall outlet receptacle is properly wired and earth-
grounded. Check that the line voltage agrees with the voltage listed on the name-rating
plate affixed to the centrifuge.
• Never use a three-to-two wire plug adapter.
• Never use a two-wire extension cord or a two-wire non-grounding type of multiple-
outlet receptacle strip.
Do not place containers holding liquid on or near the chamber door. If they spill, liquid
may get into the centrifuge and damage electrical or mechanical components.