Preinstallation Requirements - Beckman Coulter Avanti J-20 XP Instruction Manual

Rotor Profile and Description
JS-4.0 Swinging Bucket (4 place)
JCF-Z Continuous Flow/Zonal Rotor
JE-5.0 Elutriation Rotor
a
Maximum speeds are based on a solution density of 1.2 g/mL with the following exceptions: the JA-18.1 rotor is rated for a density of 1.4 g/mL;
the JCF-Z rotor is rated for a density of 1.45 g/mL; and the JE-5.0 rotor is rated for a density of 3 g/mL.
b
Maximum speed for the JA-30.50 Ti rotor is 26 000 rpm in the Avanti J-20XP centrifuge, and 30 000 rpm in the Avanti J-30I centrifuge.
c
Maximum speed for the JS-24.38 and JS-24.15 rotor is 10 000 rpm in the Avanti J-20XP centrifuge,
and 24 000 rpm in the Avanti J-30I centrifuge.
d
In the Avanti J-20XP, the JCF-Z Continuous Flow/Zonal Rotor can be used in the continuous flow and reorienting gradient zonal
configurations only.

PREINSTALLATION REQUIREMENTS

Max
RPM
r = 226 mm 4 000
max
d
20 000
r 5 000
max
large
chamber = 168 mm
standard
chamber = 125 mm
Sanderson
chamber = 126 mm
Do not attempt to install this instrument. Its purchase price includes
installation by Beckman Coulter personnel. Installation by anyone
other than an authorized Beckman Coulter representative invalidates
any warranty covering the instrument.
Preinstallation requirements have been sent prior to shipment of
the instrument. The following information is provided in case the
centrifuge must be relocated.
The centrifuge will be installed upon initial purchase by a Beckman
Coulter Field Service representative after preinstallation requirements
Specifications and Preinstallation Requirements
Max
RCF Max
a
(× g) Capacity
4 × 1 liter
4 050
4 blood bags
12 microplates
148 RIA tubes
39 900 660 mL
(standard core)
1250 mL
(large core)
240 mL
(small core)
4 700 40 mL
3 500 4.0 mL
4 230 5.5 mL
Rotor
Manual
Number
J-TB-006
JCFZ-IM
JE5-IM
1-7