Setting Run Time - Beckman Coulter Avanti J-26S XP Instructions For Use Manual

3
Turn the
When the run is started, the centrifuge operates at the set speed.
The corresponding RCF is automatically calculated.
a. Press
Setting RCF
1
Check to see if the red
a. If it is lit, go to step 3.
2
Press the
On the display, the red
3
Turn the
The centrifuge operates at a speed calculated to produce the set RCF value.
a. Press

Setting Run Time

Pressing the
mode is the default.
PN B10087AB
knob until the required RPM appears in the
SPEED
to display the RCF value.
RPM/RCF
light is lit on the display.
RCF
key to select the
RPM/RCF
( g) LED lights.
RCF
knob until the required RCF value appears in the
SPEED
to display the
RPM/RCF
key toggles the system between
TIME/HOLD
mode.
RCF
value.
RPM
HR:MIN
Operation
Entering Run Parameters
display.
SPEED
display.
SPEED
mode and mode.
HOLD HR:MIN
2
2-5