Mounting; Mounting The Tlp Pro 1022M; Wall Mounting - Extron electronics TLP Pro 1022M User Manual

Mounting

This section outlines the various options for:
•
•

Mounting the TLP Pro 1022M

Wall Mounting

The touchpanels can be mounted into drywall.
ATTENTION:
Some local building codes require the touchpanel to be mounted in a wall box such as the
Extron BB 710M (see
If local codes permit, you may mount the touchpanel without the wall box (see
without a wall box
Mounting the TLP Pro 1022M
Wall Mounting
•
Furniture Mounting
•
Mounting the TLP Pro 1022T
Desktop Mounting
•
VESA Mounting
•
Do not install the TLP Pro 1022M in a fire resistant rated wall or partition assembly.
•
Ne pas installer le TLP Pro 1022M dans un mur résistant au feu ou une cloison.
•
All structural steps and electrical installation must be performed by qualified personnel
•
in accordance with local and national building codes and electrical codes.
Toute étape structurelle et installation électrique, doit être effectuée par un personnel
•
qualifié, conformément aux codes du bâtiment, aux codes incendie et sécurité, et aux
codes électriques, locaux et nationaux.
Mounting with a wall box
on page 20).
on the following page).
Mounting
TLP Pro 1022 Series • Mounting 18