Install Board Rack Cm-2846, Cm-2843 And Cm-2848; 19" (Swing) Frame Installation - Siemens SICAM RTU User Manual

Installation
1.2.4

Install Board Rack CM-2846, CM-2843 and CM-2848

The board racks CM-2846, CM-2843 and CM-2848 are primarily designed for
19" (swing-)frame installation.
The wall fastening kit (TC2-702 / 6MF13130CH020AA0), which is necessary for rear panel in-
stallation, must be ordered separately.
The board rack CM-2847 is only designed for 19" (swing-)frame installation.
1.2.4.1

19" (Swing) Frame Installation

Proceed as follows:
·
Determine the position at which the board rack is to be installed; please note thereby, that
a space of 3HU must be maintained above the board rack
·
Screw the board rack to the 19" frame; use therefore the M6x16 (DIN 85) screws and the
washers 6,4-KST (DIN 125) at position
1
min. 3HU
32
‚
PS-263x
CP-2016 DI-2110 DO-2210 AI-2300 DI-2110 CP-2019 AI-2301 DI-2110 AI-2301 DI-2110
SICAM AK
3
•
, and the ESD-screw M6x14 at position
PS-263x
CP-2019 DI-2110 DO-2210 AI-2300 AI-2301 DI-2110
SICAM AK
2
SICAM RTUs, SICAM AK 3 User Manual
Edition 07.2016, DC2-028-2.03
ƒ