Removing Peripheral Cable - Siemens SICAM RTU User Manual

Installation
1.8.3

Removing Peripheral Cable

Caution
The peripheral modules must NOT be installed in the board rack during the fitting of the associated pe-
ripheral cable.
·
Push the unlocking lever of the seating frame slightly forwards and hold it in this position
•
·
Pull the peripheral cable vertically 4-5mm downwards
Unlocking lever
·
Swing the connector of the peripheral cable to the back
thereby guided through the unlocking lever) and pull it downwards out of the board rack
„
.
76
2
3
4
‚
1
ƒ
(the hook of the grip flap is
SICAM RTUs, SICAM AK 3 User Manual
Edition 07.2016, DC2-028-2.03