5.4.2.2
Processing and Communication Element(s)
After removing the processing and communication element from the board rack, the function
of the affected subsystem is naturally not present.
Since for the replacement of a processing and communication element a shutoff of the power
supply is not required, the function of other basic system elements and their subordinate sys-
tem elements is maintained.
After the insertion of the new processing and communication element, this performs a startup.
5.4.2.3
Serial Interface Module
For the replacement of a serial interface module first the basic system element (carrier mod-
ule) must be removed from the board rack. For this, please consider the previously mentioned
consequences for the system.
After the insertion of the basic system element, this performs a startup.
5.4.2.4
Peripheral Elements
After the removal of a peripheral element the belonging function is naturally no more present.
In the diagnosis the corresponding module is signaled as failed.
Since for the replacement of a peripheral element a shutoff of the power supply is not re-
quired, the function of the basic system elements and their subordinate system elements is
maintained.
SICAM RTUs, SICAM AK 3 User Manual
DC2-028-2.03, Edition 07.2016
Service
229