Glue Serial Number On Front Panel; Communication Cabling - Siemens SICAM RTU User Manual

1.4.4

Glue Serial Number on Front Panel

The serial number of each SIM, which get mounted on a BSE, must be glued on the front
panel of the carrier module. A label with the serial number is part of the SIM.
This label must be placed as shown in following example:
1.4.5

Communication Cabling

This section describes how the various methods of communication can be realized by means
of standard modems and cables.
The following kinds of communication are shown:
·
Serial Communication
─ Point-to-Point Traffic/Multi-Point Traffic
─ Multi-Point Traffic via Glass Fiber Optic and Star Connection
─ Analog Dial-Up Traffic
─ Dial-Up Traffic
─ Dial-Up Traffic GSM
─ Serial communication with DMS (Digital Multiplex System)
·
LAN Communication (Ethernet TCP/IP)
·
Field bus Communication (PROFIBUS-DP)
The board racks and their configuration shown in the pictures are examples. They are used in
order to show which connection options are available with corresponding configuration.
Note:
Communication cables are, if possible, to be installed separately from the supply and peripheral cables.
SICAM RTUs, SICAM AK 3 User Manual
DC2-028-2.03, Edition 07.2016
Installation
43