Peripheral Elements; Setting The Module Address - Siemens SICAM RTU User Manual

2.5

Peripheral Elements

2.5.1

Setting the Module Address

The peripheral element is coupled to the basic system element via the Ax 1703 peripheral
bus.
The address of the peripheral element on the Ax 1703 peripheral bus is determined in
SICAM TOOLBOX II when defining the Ax 1703 peripheral bus configuration. This address is
then set by means of the PBA switch (ñ) on the peripheral element.
SICAM RTUs, SICAM AK 3 User Manual
DC2-028-2.03, Edition 07.2016
System Components
111