Power Supply; General; Possible Configurations - Siemens SICAM RTU User Manual

1.7

Power Supply

1.7.1

General

SICAM AK 3 can be supplied with the power supplies PS-2630 and PS-2632. Depending on
requirements a differing number are used.
1.7.2

Possible Configurations

Board Rack CM-2844
PS-2 6 3 x
SI CAM AK
PS-2 6 3 x
SI CAM AK
SICAM RTUs, SICAM AK 3 User Manual
DC2-028-2.03, Edition 07.2016
Designation
PS-2630 Power supply
24-60 VDC AK 3
PS-2632 Power supply 110-220 VDC,
230 VAC AK 3
(H05 VV-F 3G 2.5 flexible lead)
In the basic configuration the board rack is fitted with one power
supply.
This is installed in the left slot.
CP-2 0 1 6 DI-2 1 1 0 DI-2 1 1 0 CP-2 0 1 9 D O-2 2 1 0 AI-2 3 0 1 AI - 2 3 0 0
A second power supply can be used for redundancy.
This is installed in the right slot.
CP-2 0 1 6 DI-2 1 1 0 DI-2 1 1 0 CP-2 0 1 9 DI-2 1 1 0 DO-2 2 1 0 AI-2 3 0 1 AI-2 3 0 0 PS-2 6 3 x
S ICAM AK
Installation
Item-Number/MLFB
GC2-630
6MF11130CG300AA0
GC2-632
6MF11130CG320AA0
TF5-002
6MF13140FA020AA0
71