How To Install Additional Pcs 7 Libraries - Siemens SIMATIC PCS 7 Service Manual

5.4

How to Install Additional PCS 7 Libraries

NOTICE
Post-installing or removing PCS 7 libraries
If you install or remove an older version of the PCS 7 Library, PCS 7 Basic Library or PCS 7
Advanced Process Library after the installation of PCS7 V8.0 including Update 1, you must
re-install the latest versions of the PCS 7 Basic Library or PCS 7 Advanced Process Library
via the PCS 7 system setup afterwards. Do not use the product setup of these libraries to do
this. This relates, for example, to PCS 7 Library V6.1+SP1+Upd17, PCS 7 Basis Library V7.1
SP3+Upd6 and PCS 7 Advanced Process Library V7.1 SP5+Upd3, which are located on the
SIMATIC PCS 7 DVD 2/2 in the Additional_Products folder. This is necessary in order to
guarantee proper functioning of the CFC driver generator.
Requirements
● The operating system including the required components is installed.
● PCS 7 has been installed.
● All applications are closed.
● The PCS 7 software package with the required library is available on the
Procedure
The following steps serve as an example.
1. Run the "SETUP" program.
2. Select a setup language.
3. Click "Next".
4. Follow the instructions of the setup wizard and then close the setup program.
5. Install the latest version of this library from the current
Additional information
On the libraries supplied with PCS 7:
● PCS 7 Basis Library:
● PCS 7 Library:
Software update without utilization of new functions
Service Manual, 03/2012, A5E02779792-02
System; SIMATC PCS 7 DVD, for example.
The libraries and corresponding setup program are available on the
System; SIMATIC PCS 7 DVD in the "Additional_Products" directory.
NOTICE
Only the AS blocks of the same PCS 7 version may be loaded on an AS.
PCS 7 DVD.
bli-readme.rtf file
LIB-Readme.wri file
Installation of PCS 7 and Settings on the ES
5.4 How to Install Additional PCS 7 Libraries
Process Control System; SIMATC
Process Control
Process Control
33