Sicam Ak 3 „Stand-Alone" Telecontrol Station - Siemens SICAM RTU User Manual

6.2.1 SICAM AK 3 „Stand-alone" Telecontrol Station
The communication to the process takes place with local peripherals or serial communications
protocols (e.g.: MODBUS, ...)
The local ethernet ports on CP-2016 or CP-2019 are not used in this application and thus
must be deactivated for security reasons.
The required parameter can be set on the BSE under
adresses
·
Mode of Ethernet ports
·
Own IP address
·
Subnet mask
Automation Zone
SICAM AK 3
SIC AM AK
SICAM RTUs, SICAM AK 3 User Manual
DC2-028-2.03, Edition 07.2016
= 1 IP address (connected ports in switch mode)
= 0.0.0.0
= 0.0.0.0
SICAM AK
Netzwork settings| IP addresses
..........
Own IP address
....................
Subnet mask
Process
Automation Units and Automation Networks
Netzwork settings
CP-2016 or CP-2019
X0
X1
X2
X3
0.0.0.0
0.0.0.0
| IP
245